Connect the equipment. Plan the antenna placement. Keep the network design focused. The ZBT WE1026-2.4G brings together a 4G module platform, 300Mbps 2.4GHz Wi-Fi, and one 100Mbps LAN port. With four detachable SMB antennas specified with a 1.5m length, it is a hardware option to evaluate for kiosks, digital signage, and network-enabled equipment where router placement and antenna positioning need separate consideration.
Equipment Connectivity with Flexible Antenna Placement
A kiosk or equipment installation often has different locations available for its networking hardware and antennas. The WE1026-2.4G lists four detachable SMB antennas with a 1.5m length, providing an antenna arrangement to assess against the available installation space.
Plan antenna positioning alongside enclosure materials, cable routing, connector access, and local signal conditions. An extended antenna arrangement does not guarantee coverage through a metal cabinet; verify reception in the actual installation before rollout.
MTK7620A Processing with Integrated Wi-Fi
The WE1026-2.4G uses the MTK7620A MIPS 24KC chipset at 580MHz, with integrated 2.4GHz Wi-Fi. Wireless support is IEEE 802.11n/g/b, with a listed rate of 300Mbps. This is a 2.4GHz wireless platform, not a dual-band or Wi-Fi 6 model.
Memory consists of 128MB DDR2 RAM and 16MB NOR flash. The physical interface list includes one 100Mbps LAN port, one USB 2.0 port, one TF card slot, one 4-pin port, and one reset button.
The 300Mbps figure describes the Wi-Fi link specification, not guaranteed Internet throughput or cellular download speed. Actual performance depends on the modem configuration, carrier service, radio conditions, client devices, and interface used.
Interface & Connectivity at a Glance
Single-Module Cellular Hardware for Your Target Network
The product sheet identifies the WE1026-2.4G as a 4G router and lists one mini-PCIe module slot and one SIM card slot with SIM/USIM support. It is a single-module, single-SIM platform; dual-carrier operation should not be assumed.
Choose the supplied modem configuration around your deployment country and operator. The sheet does not provide a cellular band list or modem model, so confirm both before ordering for a specific network.
Practical Applications for Connected Equipment
The combination of a local Ethernet port, 2.4GHz Wi-Fi, and detachable antennas makes this model a candidate for focused equipment-connectivity projects. Final suitability depends on the connected device, firmware, installation conditions, and cellular service.
- Self-Service Kiosks: Evaluate the LAN connection for a kiosk controller, with cellular access selected for the site and antenna positioning tested around the enclosure.
- Digital Signage: Connect a compatible Ethernet media player and assess content-update bandwidth against the chosen cellular plan and local coverage.
- Vending and Service Equipment: Consider network access for equipment with a compatible Ethernet interface. Machine-control protocols and remote management require separate confirmation.
- Remote Monitoring: Evaluate data connectivity for an Ethernet-based monitoring controller, with firmware behavior and any required security functions validated during testing.
- Temporary Equipment Installations: Consider a cellular connection where fixed broadband installation is impractical, subject to suitable carrier coverage and a compatible modem configuration.
Place the Router Around the Equipment. Plan the Antennas Around the Signal.
One 100Mbps LAN port, 300Mbps 2.4GHz Wi-Fi, and four detachable SMB antennas define a focused connectivity platform. Use the specified 1.5m antenna arrangement as part of the installation plan, then validate reception and performance at the actual site.
Integration Details to Confirm
The supplied sheet lists a 4-pin port but does not define its function or pinout. Confirm the power interface, input-voltage requirements, and wiring before connection. Do not assume the port provides serial communication, ignition control, or another specific function.
USB and TF card applications depend on firmware support. Confirm any required storage, logging, peripheral, VPN, or remote-management functions separately. Check operating temperature, mounting, and enclosure requirements for the installation rather than assuming an industrial or outdoor rating.
Procurement & Evaluation
Share the equipment type, deployment country, preferred carrier, data requirements, and available installation space when requesting a WE1026-2.4G configuration. Confirm the modem, cellular bands, SIM format, power requirements, and antenna arrangement before moving from evaluation to a larger deployment.
Request pricing, sample availability, lead times, and configuration details based on your project requirements.
Plan Your Connected Equipment Project
Discuss WE1026-2.4G configuration, modem compatibility, and integration requirements with ZBT.
Contact Our Sales Team →